The " No Brainer Trainer " ™ is a device to train the dog for the ramps to the dog walk and teeter tauter. It is 8 feet long and 12 inches wide. The contact zones are 2 feet long. The surface is rough and is painted with sand.



The 2 by 2's on each side of the plywood are notched - one inch off center - to allow for a support which enables the trainer to pivot.



The trainer can lay flat on the ground or you can position it over a support, as shown here, to simulate a small seesaw. The wood support is about 2 inches high and creates a very good seesaw for training. The wood support is included in the price.